+- TT Website Forum (https://www.ttwebsite.com/forums)
+-- Forum: Isle of Man TT Website (https://www.ttwebsite.com/forums/forumdisplay.php?fid=3)
+--- Forum: General Discussion (https://www.ttwebsite.com/forums/forumdisplay.php?fid=137)
+--- Thread: Can someone give me a detailed explanation of what can be done to a Superstock? (/showthread.php?tid=19831)
Can someone give me a detailed explanation of what can be done to a Superstock? - KypDurron - 02-06-2015
I've always wondered this, and I've pieced together bits of information but never gotten the whole picture in detail. I know there are a lot of people on here with detailed knowledge and even first hand experience and I'm quite interested in as much info as I can find.
I'm especially curious about what, if anything, can be done to the engine. It always amazes me that they can thrash those bikes around for the length they do.
RE: Can someone give me a detailed explanation of what can be done to a Superstock? - Superbike - 02-06-2015
Disc pads, fork internals, rear shock, chain drive, exhaust and ecu remap.
RE: Can someone give me a detailed explanation of what can be done to a Superstock? - Alfie Noakes - 02-06-2015
I think there's basic engine work/rebuild allowed but it all must be within manufacturing tolerances/spec, not allowed to use oversize pistons.
RE: Can someone give me a detailed explanation of what can be done to a Superstock? - Kieranzxt - 03-06-2015
Engine work is limited to blue printing
RE: Can someone give me a detailed explanation of what can be done to a Superstock? - KypDurron - 05-06-2015
What's blueprinting, if I may ask?
RE: Can someone give me a detailed explanation of what can be done to a Superstock? - BcakWeleher - 05-06-2015
(05-06-2015, 04:49 AM)KypDurron Wrote: What's blueprinting, if I may ask?
Rebuilding the motor to exact specification to take away any slack tolerances allowed at the factory.
This should give optimal output and increased reliability.
It's quite expensive and I think it prob happens less these days as tolerances are better than ever at the factory??????
In my day you would send the motor off to be rebuilt almost as a matter of course. Tony Scott was a well known "blueprinter". I have a 1993 GSXR 750 motor rebuilt after running in by Richard Albans at TTS engineering that has never since missed a beat.
If it was a two stroke I am guessing Stan Stephens was the big name.
Other engine builders/tuners are available !!
RE: Can someone give me a detailed explanation of what can be done to a Superstock? - Kieranzxt - 06-06-2015
As said, it's a method of rebuilding the engine so it is in perfect but stock form, with everything being at the optimum within the tolerances, cam lift, bore, piston size, journal sizes, etc, etc